1176
31
View this release
Alternative links
updated 4-15-2024: I made minor changes to the bolt and dust cover, i made a skeletonized cylinder to save weight.
a slightly updated version with steel chamber liners and a guide rod to hold it into battery.
It uses the same parts as the V1 but requires a 1 5/8" fence post or steel tube to be a chamber liner. it needs to have a 39-39.5mm ID to work with the majority of 37mm shells.
the guide rod should work with an unmodified carbine buffer spring. the guide rod and chamber axis rod can be made from 5/8" aluminum or printed and have 1/4-20 threaded rod inserted.
this is a fusion 360 file for now because i realized STEP files were losing most of the file management i was doing.
a slightly updated version with steel chamber liners and a guide rod to hold it into battery.
It uses the same parts as the V1 but requires a 1 5/8" fence post or steel tube to be a chamber liner. it needs to have a 39-39.5mm ID to work with the majority of 37mm shells.
the guide rod should work with an unmodified carbine buffer spring. the guide rod and chamber axis rod can be made from 5/8" aluminum or printed and have 1/4-20 threaded rod inserted.
this is a fusion 360 file for now because i realized STEP files were losing most of the file management i was doing.
Related to This Release
1044
28
1
BETA: G£OCK & WE$$ON 38mm
This is a beta of a 7 shot, pump action, 37mm flare launcher. My model is built around an et cetera CM2037 37mm barrel, your may need to modify the d…
234
11
15mm to 12 gauge flare adapter
If you have access to 15mm flares, screamers or bird bangers these allow you to shoot them out of a 12 gauge flare gun. you just load a 209 shotgun p…
728
8
ALPHA: glock style sar 9 frame
full disclosure, I don't own a sar 9 or a parts kit, i haven't printed this model yet. the internal geometry is based on @ArmThyRightHand https://ody…
668
14
m69 37mm launcher v2
this is a break action 37mm launcher. it uses a 1 5/8" steel tube with a 39-39.5mm ID as a barrel liner, an ar15 firing pin an AR15 FCG, an ar style …
1258
18
1
Chonky Boi AR lower v5
this is a step file with 4 variations of the Chonky Boi receiver.
two fit mil spec uppers and 2 fit bear creek arsenal side charging uppers. some ha…
Twitter
Matrix
Source
