480
2
View this release
Alternative links
Remix of FTN.3 EZ Suppressor Pack v1.1 w/ 5-8"x24 threads, recommend getting cheap 5/8"-24 tap and to ensure threads are perfect. Use 5/8"24 to 1/2"x28 thread adapter. Print muzzle down, 3mm walls, 2mm top/bottom, 99%infill (lines). I can confirm this does work with .300BLK out of 16" barrel. Use the JB-Weld FIberweld wrap to add extra strenght.
Related to This Release
310
7
ChurchMouse 22lr Suppressor_5_8-24
Remix of ChurchMouse 22lr Suppressor MegaPack and made monolythic (one print) w/ 5-8"x24 thread, recommend getting a cheap 5/8"x24 tap to ensure thre…
0
FTN.3 Rimfire with 3/4 NPT Threads
**** CLICK THE PHOTO TO DOWNLOAD ****
This is an FTN.3 Rimfire that uses 3/4 NPT threads. There is also a detached section of the tube that is just …
433
7
FTN.4 Chode_5-8x24 REMIX
Remix of FTN 4 CHODE series with a 5/8"x24 thread pattern, I recommend getting a cheap 5/8"x25 tap and run thru after printing to ensure the threads …
3802
21
FTN.3 D Cell Remix by Spartan81
This is a multi caliber setup to used inside of any D-Cell metal tube. Aluminum, Stainless Steel or Titanium.
Outside Diameter of 1.50 inside Diame…
215
9
3D Printed 22LR Flashcan 1/2''-28
This is a simple flashcan geared toward dedicated 22LR builds with 1/2''-28 threads. UNTESTED, only posted as a request. Print muzzle end down, with …
Twitter
Matrix
Source
