3802
21
This is a multi caliber setup to used inside of any D-Cell metal tube. Aluminum, Stainless Steel or Titanium.
Outside Diameter of 1.50 inside Diameter of 1.35+/- .02
I.D. doesn't really matter since you will need to scale baffles anyway.
This has been tested on 556 on 11.5 inch barrel supersonics, and 556 subs. Others have tested with the Overbore on 300BO subs with no issues.
PCC should hold up fine since 556 is the higher pressure of the two. 308 has not been tested.
3570
42
FTN-Soyuz 556 V1.0 Open Beta
Mashup between Nikolai's flowthrough suppressors and the FTN series
Features
-sideways print
-3M casting tape reinforcement
-3/4x16 thread adapter
…
1075
24
FTN.3 Rimfire - Form 1 Remix by youknowthatsright
Want to Form 1 your FTN.3 Rimfire?
Thanks to youknowthatsright, now you can.
670
18
FTN.2 1.375x24 threads (updated 10/22/23)
By request, I changed the thread pattern on the FTN.2 and FTN.2 mini to 1.375x24 threads. I have nothing of that thread pattern, so these are UNTESTE…
480
2
FTN.3 EZ K can (Free Man)
Remix of FTN.3 EZ Suppressor Pack v1.1 w/ 5-8"x24 threads, recommend getting cheap 5/8"-24 tap and to ensure threads are perfect. Use 5/8"24 to 1/2"…
Twitter
Matrix
Source
