21
2
Christmas Forever presents, someone else's file that I had to fix.
This thing was a file on thingiverse where the original creator seemed to have a different idea of tolerance. I reworked the file to have looser tolerances as well as changed the geometry to not have to slam the magazine in the gun because the front lips we're way too high.
It could still use some changes but I'm moving away from HK in general because they hate the civilian arm marketplace. Don't give your money to people who hate you. HK hasn't made anything worth a crap in 30 years anyway.
Hot chicks in bikinis belong in gun ads.
README
print with the rails mostly perpendicular to the bed with supports
if you print this with the bottom of the mag base on the bed the droopage will make the tolerance too tight to put on without a mallet. Taking it off will be worse, which is the main issue.
reuse the original spring, locking plate, and follower.
PLA+ is the baseline to print with
disassembly will need a tool longer than the baseplate. I used a m4x40mm bolt mainly, anything long should work though.
Mantis mag base should be printed the same way, you will need to clean supports off the pic rails.
guncadindex tags:
9x19mm
magazine
extension
hk p30
mantis-x
LBRY Tags: 9x19; magazine; hkp30; extension; mantisx
This thing was a file on thingiverse where the original creator seemed to have a different idea of tolerance. I reworked the file to have looser tolerances as well as changed the geometry to not have to slam the magazine in the gun because the front lips we're way too high.
It could still use some changes but I'm moving away from HK in general because they hate the civilian arm marketplace. Don't give your money to people who hate you. HK hasn't made anything worth a crap in 30 years anyway.
Hot chicks in bikinis belong in gun ads.
README
print with the rails mostly perpendicular to the bed with supports
if you print this with the bottom of the mag base on the bed the droopage will make the tolerance too tight to put on without a mallet. Taking it off will be worse, which is the main issue.
reuse the original spring, locking plate, and follower.
PLA+ is the baseline to print with
disassembly will need a tool longer than the baseplate. I used a m4x40mm bolt mainly, anything long should work though.
Mantis mag base should be printed the same way, you will need to clean supports off the pic rails.
guncadindex tags:
9x19mm
magazine
extension
hk p30
mantis-x
LBRY Tags: 9x19; magazine; hkp30; extension; mantisx
Related to This Release
290
14
Pla_ak_ak_ak 9mm Linear Comp 1/2X28 and 3/4X10 [2/21/24]
Linear Comps for your Mac, AR9, or Pistol. If it has 1/2X28 or 3/4X10 threads I got you covered. Step and F3d included so you can make your own
Com…
431
6
Custom Glock gen4 Magazine Assembly clear polymer jacket steel frame braz
Custom Glock gen4 Magazine Assembly clear polymer jacket steel frame braz
LBRY Tags: custom glock gen4 magazine assembly clear polymer jacket steel …
93
4
3D Printed Kahr Arms Single Stack 9mm Magazine Carrier - File Release
This is the full file package with Readme, STEP, STL, and Native models for an OWB 3D Printed Kahr Arms Single Stack 9mm Magazine Carrier.
LBRY Tags…
34
4
MagPump - Ruger Max-9 magazine sleeve
Ruger Max-9
for my own print I used polymaker PETG with the standard .3 settings with a .6mm nozzle.
no supports needed even with PETG.
the magazin…
18
2
MagPump - HK P30 VP9 P2000 magazine adapter
for HK P30 VP9 P2000 magazines for the magpump
the way HK does their magazine releases are sub optimal. Also gay because HK is a gay company.
for m…
Twitter
Matrix
Source
