744
14
View this release
Alternative links
i made minor modifications to my original design. This one clears the bolt carrier but I don't have a 7.62 upper or 7.62x39 snap caps to test.
hardware required:
-usgi Ar15 fcg
-carbine buffer tube kit (no castle nut or back plate though)
-Romanian single stack ak mags (not sure if Chinese or Yugo single stack will work...)
-a Bear Creek side charging upper receiver (not sure if other brands will work)
-4x 6-32 2" long socket head screws for supporting the back end.
-1x 6-32 1" long socket head screw for supporting the pistol grip
-1x 8-32 square nut and 8-32 5/8" socket head screw for indexing the buffer tube.
-1x 8-32 1 1/4" long socket head screw for the mag release
-1x 1/4" by 1" long compression spring for the mag release
-2x 1/4" 1.5" long screw posts or hitch pins for mounting the upper to the lower.
i think you may need to take a dremal and remove the lump between the feed ramps of the ar15 style barrel for this to feed properly.
LBRY Tags: ar15; ak; 7.62x39mm; ar; 3d printed lower
hardware required:
-usgi Ar15 fcg
-carbine buffer tube kit (no castle nut or back plate though)
-Romanian single stack ak mags (not sure if Chinese or Yugo single stack will work...)
-a Bear Creek side charging upper receiver (not sure if other brands will work)
-4x 6-32 2" long socket head screws for supporting the back end.
-1x 6-32 1" long socket head screw for supporting the pistol grip
-1x 8-32 square nut and 8-32 5/8" socket head screw for indexing the buffer tube.
-1x 8-32 1 1/4" long socket head screw for the mag release
-1x 1/4" by 1" long compression spring for the mag release
-2x 1/4" 1.5" long screw posts or hitch pins for mounting the upper to the lower.
i think you may need to take a dremal and remove the lump between the feed ramps of the ar15 style barrel for this to feed properly.
LBRY Tags: ar15; ak; 7.62x39mm; ar; 3d printed lower
Related to This Release
483
10
AR lower mini30 mag well for BCA side charging 7.62 upper BETA
this is a lower that lets you use ruger mini 30 7.62x39 OEM factory mags in a Bear Creek Arsenal 7.62x39 side charging upper.
it requires
-1 oem rug…
1432
32
bull pup rimfire magnum AR lower .22 mag or .17 HMR
this build requires a bear creek arsenal side charging .22 magnum or 17 hmr upper to work. I use a 17 hmr 7.5" bbl and it only cycles reliably unsupr…
836
15
stl files for AR 22 magnum 35 round magazines
updated 8/24/2023: i fixed the issue with the wrong stl files being uploaded.
this is a zip file for a set of four STLs to make a 35 round ar 22 mag…
481
11
chonlky boi lower receiver for Bear Creek side charing upper
This lower is designed to work with a bear creek arsenal side charging upper.
It requires
-1x AR FCG
-1x carbine buffer tube kit (no castle nut or …
1155
15
BETA: g19 gen 5 style grip that use PSA dagger rails.
This is a glock 19 frame that has a gen 5 style grip but uses gen 3 internals. It requires PSA dagger brand rails but any OEM gen 3 compatible slide …
Twitter
Matrix
Source
