Mostly accurate model of an Uzi bolt.
Lacks ejection port at this time, might add later.
Bolt face and ejector geometry is accurate.
Feel free to use it in any project.
LBRY Tags: gun; guns
u/isthatsuperman · 2022-03-25 19:34:10 UTC · score 10
I had a similar ida of using a hi point slide with some modifications to use as an uzi bolt.
u/AbbreviationsFancy19 · 2021-09-26 19:06:38 UTC · score 3
Using the binder jetting stainless steel and bronze alloy option.
I uploaded a Sten bolt (semi) which weighs atleast 1LB and it costs $206.
An uzi bolt is $233 (semi)
A solid FGC 9 Bolt is $340 but its $140 with a 1'' hole going through the bolt for the top bar if saving money is ne…
u/Pattern_noticer02 · 2023-05-13 12:39:36 UTC · score 8
Why not make a multiple parts slide? Tube with it's bottom oppened to create rails, bolt face from a square Steel bar, which will hold the firing pin, front piece to hold the Spring and interface with the barrel (i'd advise a spring around the barrel). Look the panther2 design, you Can shor…
Complete 1911A1 Drawings
MR07 Approximation .STEP
10.5-Inch Uzi Barrel
Twitter
Matrix
Source
