33
4
The shot card cap is meant to help with holding together shells during storage along with creating a tighter group. Put a dab of wood glue before placing the cap on top of the 43R shot shell. Print these in spiral vase mode with as thin of a bottom layer as you can get away with.
LBRY Tags: 43r; shotcard; modelopolytactico; shotshell; 3d2a
261
15
38 special snake shot capsules
Printed in spiral vase to allow for easy printing and maximize payload capacity. Very effective if sized correctly.
These are a much cheaper alternat…
81
5
HW4 Mega Pistol Bolt Jig
Created a jig for cutting the 6.5MM nub into the .5" bar stock for the bolt face. This makes cutting easier with hand tools in a table vice. This doe…
72
4
43R SKS Pouch Insert
Designed a 21 round insert for a surplus SKS clip pouch. The files should all be printed in spiral vase mode with 5 bottom layers.
LBRY Tags: 43r; …
35
3
MAF Arms 3D Placard
MAF arms has some of the best 3d2a parts kits on the market so a placard to honor Matt and the rat next to the collection is only fitting.
LBRY Tag…
Twitter
Matrix
Source
