232
7
View this release
Alternative links
Marlin 60 Slip on shhh adapter - REMIX from Ruger 10-22. Contains regular remix and SilencerCo model
Apparently, unbeknownst to me, there’s a couple of variations of the Marlin 60, there’s one like mine, 16mm muzzle diameter that has a lengthened barrel protruding out from the loading tube and there’s also a variation where the end of the muzzle meets the end of the load tube, which is 17mm. Check your model before printing.
update: I added a mod file for flush model for testing purposes.
Printed with 4 walls .2 layer height with tree supports. Technically you don’t need the support but only for a cleaner look, will not inhibit fitment if not used
LBRY Tags: marlin; marlin 60; marlin 60 slip on; suppressor; airsoft
Apparently, unbeknownst to me, there’s a couple of variations of the Marlin 60, there’s one like mine, 16mm muzzle diameter that has a lengthened barrel protruding out from the loading tube and there’s also a variation where the end of the muzzle meets the end of the load tube, which is 17mm. Check your model before printing.
update: I added a mod file for flush model for testing purposes.
Printed with 4 walls .2 layer height with tree supports. Technically you don’t need the support but only for a cleaner look, will not inhibit fitment if not used
LBRY Tags: marlin; marlin 60; marlin 60 slip on; suppressor; airsoft
Related to This Release
426
13
Pop Bottle Adapter for 1/2-28 Threads
This does require a 1/2-28 tap, or you can heat it a bit and thread it onto the barrel.
Requires no supports, print 100% Infill (99% for Cura to spe…
386
10
VZ61 Barrel Thread adapter V2
This is a VZ61 thread adapter. It uses the factory collar for retention and adapts to a 5/8 thread. Note, should be printed in nylon and will require…
566
12
.22LR shushy thingy
.22Lr suppressor, designed and tested by me :D not that many rounds but roughly 200. ()
Did Finite Element Analysis (FEA) on it and it's supposed to …
1723
37
22 go pew
22lr suppressor. 7.5 and 4 inch available
76
2
Ven22ri 5-8x24
My Remix of PLA+ boi's projects and The Gatalog's DIY Suppressors to use the 5-8"x24 to 1-2"x24 or 1-2"x36 thread adapters readily available
Print th…
Twitter
Matrix
Source
