View this release
Alternative links
EDIT, Jan 29, 2023: Ooops! Uploaded new ZIP file with STL, 3MF, STEP and README files.
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs - https://www.thingiverse.com/thing:4639179
This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that measure 17mm (0.67in) across or smaller. I also removed some extraneous faces from the CAD model, so it will print a little cleaner. I made the lugs solid, as I've had the outline-style lugs shear off.
If you are not using a slim octagonal AR-15 handguard you can still use the original AFG that I uploaded, which has a flat bottom that should work with most M-Lok handguards. You can find that AFG here - https://www.printables.com/model/304426-m-lok-afg-angled-foregrip
I have also uploaded a Keymod AFG. You can find the Keymod AFG here - https://www.printables.com/model/304095-keymod-angled-foregrip-afg
I used the Braudel T-Nut and Screw set. They are metric, not real M-Lok spec hardware, but significantly cheaper than the real thing and they work the same.
https://www.amazon.com/gp/product/B07FTCBD3L/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Print Settings:
Printer brand:
Creality
Printer:
Ender 3
Supports:
Yes
Resolution:
0.2-0.24mm
Infill:
60%
Filament brand:
Polymaker
Filament color:
Black
Filament material:
PolyLite ASA
Notes:
0.2 to 0.24mm layers
100% fan for bridging, 0% fan for everything else. If you have a really good cooling duct, you can maybe use less than 100% for bridging.
Use supports everywhere, with mounting surface down on build plate.
60% or greater infill
Walls, top, and bottom should be 2.4mm or greater, as appopriate for your line width and layer height.
LBRY Tags: afg; angled foregrip; 3d pews; guncad
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs - https://www.thingiverse.com/thing:4639179
This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that measure 17mm (0.67in) across or smaller. I also removed some extraneous faces from the CAD model, so it will print a little cleaner. I made the lugs solid, as I've had the outline-style lugs shear off.
If you are not using a slim octagonal AR-15 handguard you can still use the original AFG that I uploaded, which has a flat bottom that should work with most M-Lok handguards. You can find that AFG here - https://www.printables.com/model/304426-m-lok-afg-angled-foregrip
I have also uploaded a Keymod AFG. You can find the Keymod AFG here - https://www.printables.com/model/304095-keymod-angled-foregrip-afg
I used the Braudel T-Nut and Screw set. They are metric, not real M-Lok spec hardware, but significantly cheaper than the real thing and they work the same.
https://www.amazon.com/gp/product/B07FTCBD3L/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Print Settings:
Printer brand:
Creality
Printer:
Ender 3
Supports:
Yes
Resolution:
0.2-0.24mm
Infill:
60%
Filament brand:
Polymaker
Filament color:
Black
Filament material:
PolyLite ASA
Notes:
0.2 to 0.24mm layers
100% fan for bridging, 0% fan for everything else. If you have a really good cooling duct, you can maybe use less than 100% for bridging.
Use supports everywhere, with mounting surface down on build plate.
60% or greater infill
Walls, top, and bottom should be 2.4mm or greater, as appopriate for your line width and layer height.
LBRY Tags: afg; angled foregrip; 3d pews; guncad