
View this release
Alternative links
Forward Micro M-Lok AFG: FFFTech/FFFTechnology
A micro AFG, designed for compact PDWs such as:
*Sig MCX Rattler
*SP5K (if using M-Lok Handguard)
*CZ Scorpion EVO 3 S2 Pistol Micro
*Ruger PC Charger
Also the design works well for AK "Kink" builds that use M-Lok forends, as the insertion/removal of mags can be
difficult with a full sized foregrip.
This AFG is angled 70° forwards, legally allowing it to be used on pistols.
Comes in four varieties:
*Standard
*Wrap Ridged
*Ridged
*Perforated
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 24%
Print the AFG upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
LBRY Tags: 3d printing; firearms; mlok; grip; foregrip
A micro AFG, designed for compact PDWs such as:
*Sig MCX Rattler
*SP5K (if using M-Lok Handguard)
*CZ Scorpion EVO 3 S2 Pistol Micro
*Ruger PC Charger
Also the design works well for AK "Kink" builds that use M-Lok forends, as the insertion/removal of mags can be
difficult with a full sized foregrip.
This AFG is angled 70° forwards, legally allowing it to be used on pistols.
Comes in four varieties:
*Standard
*Wrap Ridged
*Ridged
*Perforated
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 24%
Print the AFG upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
LBRY Tags: 3d printing; firearms; mlok; grip; foregrip