
View this release
Alternative links
Talon M-Lok Mini AFG: Laffs Dynamics
An angled foregrip; small in size, concave in shape. Has thumb cuts and a swelled palm section.
Curved heel with a sharp angled toe.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 55C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 28%
Support Material Percentage: 30%
Print the grip upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Swarmtech: Requested a similar design creation. Gave aesthetic opinions. Provided design parameters for overall size.
LBRY Tags: 3d printing; firearms; m-lok; mini; afg
An angled foregrip; small in size, concave in shape. Has thumb cuts and a swelled palm section.
Curved heel with a sharp angled toe.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 55C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 28%
Support Material Percentage: 30%
Print the grip upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Swarmtech: Requested a similar design creation. Gave aesthetic opinions. Provided design parameters for overall size.
LBRY Tags: 3d printing; firearms; m-lok; mini; afg