For anything that's not 22 and doesn't have the Browning tilting barrel design the I agree that ftn4 is your best choice in terms of effort vs effect.

For pistols with the tilt barrel (you'll have to ignore my ignorance of nomenclature) the kneelsun v2 by pembletonandsons(?) that mounts via the booster from their site. it works so well I accidentally v left out the aluminum sleeve and send cut send plates and despite all the extra friction fro…

I squirted out a few copies of his AR9 and what I did was get the templates for the metal parts at https://github.com/japan44/Files and then converted the svg to dxf (instructions: https://www.youtube.com/watch?v=9Uq3yGDqEFM&list=WL&index=18&pp=gAQBiAQB ) then go to sendcutsend (SCS) and upload (dxf) they will cut the pieces to you. after that I used some jigs I think this is what you need https://github.com/japan44/Rail-Press-Jigs-and-templates…

u/booliganairsoft · 2021-09-24 15:28:00 UTC · score 44

Working on designing a printable Halo Magnum using a Glock 19 base. Here is the first complete prototype.

The frame is fully printed using PY2A geometry and rails, and is filled with parts from JSD Supply. I designed the base "Magnum" geometry and had the solid and textures tweaked by /u/cha…