View this release
Alternative links
FFFTech Grip 2 to Fit Hoffman Tactical Lower V2.5, V2.6, V2.7
Mirror: https://www.thingiverse.com/thing:5078884
I modified the AWCY? Professor LAFFF/FFF Technology/3FTech grip 2 to fit the Hoffman Tactical lowers. Turns out that the grip is a size, or size and a half too small for me. It's a good bit smaller than the Magpul MOE style grips. But whatever, I already finished it, so I might as well upload it.
Texture shown is from fuzzy skin setting in Cura slicer. Grip will print smooth without it. See fuzzy skin settings below.
Link to original: https://odysee.com/@AreWeCoolYet:7/AWCY-Laffs-Grip-Pack:f
Print with the bottom of the grip down on the buildplate with a brim of 4 or 5mm. Printed okay without support. For PETG, I only use the part cooling fan for bridging, at 100%. Suggest wall thickness of 2mm or more.
Fuzzy Skin - Yes
Fuzzy Skin Outside Only - Yes
Fuzzy Skin Thickness - 0.3mm
Fuzzy Skin Density - 1.25 1/mm
Fuzzy Skin Point Distance - 0.8mm
LBRY Tags: hoffman tactical; ar-15 grip; 3d printed; ffftech
Mirror: https://www.thingiverse.com/thing:5078884
I modified the AWCY? Professor LAFFF/FFF Technology/3FTech grip 2 to fit the Hoffman Tactical lowers. Turns out that the grip is a size, or size and a half too small for me. It's a good bit smaller than the Magpul MOE style grips. But whatever, I already finished it, so I might as well upload it.
Texture shown is from fuzzy skin setting in Cura slicer. Grip will print smooth without it. See fuzzy skin settings below.
Link to original: https://odysee.com/@AreWeCoolYet:7/AWCY-Laffs-Grip-Pack:f
Print with the bottom of the grip down on the buildplate with a brim of 4 or 5mm. Printed okay without support. For PETG, I only use the part cooling fan for bridging, at 100%. Suggest wall thickness of 2mm or more.
Fuzzy Skin - Yes
Fuzzy Skin Outside Only - Yes
Fuzzy Skin Thickness - 0.3mm
Fuzzy Skin Density - 1.25 1/mm
Fuzzy Skin Point Distance - 0.8mm
LBRY Tags: hoffman tactical; ar-15 grip; 3d printed; ffftech