View this release
Alternative links
this is the shroud set is based on the FGC-9 MKI shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker.
to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker
the starter set for the FGC68 can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
MKII upper TOP rail version (normal MKII version)
https://www.printables.com/model/87752-fgc-68-mkii-upper-set
the MKII low rail uppers can be found here:
https://www.printables.com/model/177737-fgc-68-mkii-low-rail-upper-set
this low rail right is the same hight as for the new FGC9/FGC6 MKI/MKII rails that I have made.
the FGC68 MKI low rail was in a different hight.
for now the low rail shrouds are a bit limited in there options. but this will chance later in this year. for both the FGC68, FGC6 and FGC9
in case you don’t want to wait of manual update a already printed shroud just fallow the steps in this video.
https://www.youtube.com/watch?v=480iDroe8h0
https://www.printables.com/model/176422-unw-fgc9-fgc6-fgc68-mkii-diy-low-rail-on-unw-shrou
materials needed:
for the front of the shroud
1x M3 bolt 20mm long or up to 26mm
for on the top rail UNW163
2x M3 bolt 20mm long
for on the top rail UNW227
3x M3 bolt 20mm long
for on the top rail UNW300
4x M3 bolt 20mm long
LBRY Tags: paintball; magfed; fgc68; fgc-68 mki; fgc68 mki
to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker
the starter set for the FGC68 can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
MKII upper TOP rail version (normal MKII version)
https://www.printables.com/model/87752-fgc-68-mkii-upper-set
the MKII low rail uppers can be found here:
https://www.printables.com/model/177737-fgc-68-mkii-low-rail-upper-set
this low rail right is the same hight as for the new FGC9/FGC6 MKI/MKII rails that I have made.
the FGC68 MKI low rail was in a different hight.
for now the low rail shrouds are a bit limited in there options. but this will chance later in this year. for both the FGC68, FGC6 and FGC9
in case you don’t want to wait of manual update a already printed shroud just fallow the steps in this video.
https://www.youtube.com/watch?v=480iDroe8h0
https://www.printables.com/model/176422-unw-fgc9-fgc6-fgc68-mkii-diy-low-rail-on-unw-shrou
materials needed:
for the front of the shroud
1x M3 bolt 20mm long or up to 26mm
for on the top rail UNW163
2x M3 bolt 20mm long
for on the top rail UNW227
3x M3 bolt 20mm long
for on the top rail UNW300
4x M3 bolt 20mm long
LBRY Tags: paintball; magfed; fgc68; fgc-68 mki; fgc68 mki