View this release
Alternative links
revision 6 - redid the m26 threads because slavs love lh threads i guess
Revision 5 - Added M26x1.5RH for special AKs :D
Revision 4- the wrong pitch thread have been corrected, my bad on making them all fucked up in the first place. i also switched around some of the thread profiles to better suit the design.
The SYSTEMA MOLOT is a 545x39, 556, and 762 flow through suppressor intended to make use of the flow through design for a reduced weight and footprint, specifically for 556 and 762 intermediate caliber rifles.
IT IS NOT DESIGNED FOR 308/762x51.
The Molot has been through about 5 different iterations/redesigns, before setting on the kuznetsov style of flowthrough.
The first iterations, while posessing satisfactory suppression perfomance, did not have enough durability to be worthwhile.
The second, focused on increasing durability, however the design had surprising strength issues that manifested irregularly, so it was shelved.
Overall, the process has been one of the longest I have undertaken so far. Many testers wasted a lot of filament, and for this I thank them. Especially FelonyCollector.
The decision to release has come to the fact that the design has been tested successfully by multiple testers on multiple platforms.
It should be noted however that it performs best with 556.
With the 762 ak, it is not the greatest at flash and sound suppression, but will take it down a little.
Thanks to Gerald katz for his thread profiles in fusion.
I also liberally adapted the flat baffles by plaboi
LBRY Tags: molot; suppressor; 3d2a; nikolai.romanov; 3d printiing
Revision 5 - Added M26x1.5RH for special AKs :D
Revision 4- the wrong pitch thread have been corrected, my bad on making them all fucked up in the first place. i also switched around some of the thread profiles to better suit the design.
The SYSTEMA MOLOT is a 545x39, 556, and 762 flow through suppressor intended to make use of the flow through design for a reduced weight and footprint, specifically for 556 and 762 intermediate caliber rifles.
IT IS NOT DESIGNED FOR 308/762x51.
The Molot has been through about 5 different iterations/redesigns, before setting on the kuznetsov style of flowthrough.
The first iterations, while posessing satisfactory suppression perfomance, did not have enough durability to be worthwhile.
The second, focused on increasing durability, however the design had surprising strength issues that manifested irregularly, so it was shelved.
Overall, the process has been one of the longest I have undertaken so far. Many testers wasted a lot of filament, and for this I thank them. Especially FelonyCollector.
The decision to release has come to the fact that the design has been tested successfully by multiple testers on multiple platforms.
It should be noted however that it performs best with 556.
With the 762 ak, it is not the greatest at flash and sound suppression, but will take it down a little.
Thanks to Gerald katz for his thread profiles in fusion.
I also liberally adapted the flat baffles by plaboi
LBRY Tags: molot; suppressor; 3d2a; nikolai.romanov; 3d printiing