View this release
Alternative links
Uses AR-15 mag release (push button, spring, and catch), #9 x 1/2" wood screw (or cut down OEM screw or any #9 screw cut down), M5x30mm bolt and nut, and two M4x14mm bolts (12mm to 16mm should work too)
Key printed at .1mm with 'notch' facing up. Stock printed flat at .2mm with 12 walls with 60% gyroid infill, and the body is printed flat with supports at .14mm. Tolerances are tight on the key hole. Grease and work in. Butt pad you can get creative with TPU.
Also, included the STEP file, so you can get creative. I'm not the best at "looks" of shit, so if you make something sick. Let me know so I can print it!
LBRY Tags: akm; folding stock
Key printed at .1mm with 'notch' facing up. Stock printed flat at .2mm with 12 walls with 60% gyroid infill, and the body is printed flat with supports at .14mm. Tolerances are tight on the key hole. Grease and work in. Butt pad you can get creative with TPU.
Also, included the STEP file, so you can get creative. I'm not the best at "looks" of shit, so if you make something sick. Let me know so I can print it!
LBRY Tags: akm; folding stock