View this release
Alternative links
AGH MY SKELETONIZED NECK Mini Grip (AR-15): Laffs Dynamics
I warned ya in the original release I'd finish the job! Snapped my neck and now I'm a spooky bone rattle boi!
Skeletonized variant of the original AGH MY NECK Mini Grip.
Front to Back Length: ~50mm (Excluding top grip mounting section.)
Side to Side Width: Swells from 22.32mm out to 30.70mm
Top to Bottom Height: 92.94mm
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; firearms; grip; ar15; skeletonized
I warned ya in the original release I'd finish the job! Snapped my neck and now I'm a spooky bone rattle boi!
Skeletonized variant of the original AGH MY NECK Mini Grip.
Front to Back Length: ~50mm (Excluding top grip mounting section.)
Side to Side Width: Swells from 22.32mm out to 30.70mm
Top to Bottom Height: 92.94mm
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; firearms; grip; ar15; skeletonized