View this release
Alternative links
Picatinny AR Grip Mount: Laffs Dynamics
A picatinny mount, adapts AR-15 grips for the use as dedicated angled or vertical foregrips.
Any AR-15 grip with an angle of less or more than 90° is considered an angled foregrip if used in conjunction with
the Picatinny AR Grip Mount. An AR-15 grip with an angle of EXACTLY 90° will be considered a vertical foregrip if
used with the Picatinny AR Grip Mount.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; firearms; picatinny; grip; adaptor
A picatinny mount, adapts AR-15 grips for the use as dedicated angled or vertical foregrips.
Any AR-15 grip with an angle of less or more than 90° is considered an angled foregrip if used in conjunction with
the Picatinny AR Grip Mount. An AR-15 grip with an angle of EXACTLY 90° will be considered a vertical foregrip if
used with the Picatinny AR Grip Mount.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; firearms; picatinny; grip; adaptor