View this release
Alternative links
LTP Padded Frame (Canik TP9): Laffs Dynamics
Variant of the Uberclay's Bozkurt pistol frame, a 3DP version of the Canik TP9 pistol. Mostly aesthetic changes.
*Added material to the picatinny rail.
*Squared off the front of the pic rail.
*Scalloped the pic rail slots.
*Elongated the trigger guard by 6mm. (Squeeze in some gloved fingies)
*Added aesthetic "padding" on the front and sides of the grip section.
*Added semi-wrapped ridging along the bottom half of the backstap.
*Added material to the rear of the frame.
Overall, this was more for my own purposes, but I decided to release this in case any weirdo wanted a similar look from the base frame.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 90%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
This file pack is for the frame only. Other printed part files will need to be downloaded from the base design release; link provided in the below text.
Base Bozkurt pistol frame files can be found on Odysee:
Odysee: https://odysee.com/@TheGatalog-PrintableFramesReceivers:9/The-Bozkurt-Canik-TP9:c
(Other print settings and the hardware list will be provided in the base data pack)
Accreditations:
Uberclay: Creator of the Bozkurt pistol frame; used the base frame model from their design release.
LBRY Tags: 3d printing; firearms; frame; canik; tp9; c:disable-reactions-comments; c:disable-slimes-video; c:disable-slimes-comments; c:disable-reactions-video
Variant of the Uberclay's Bozkurt pistol frame, a 3DP version of the Canik TP9 pistol. Mostly aesthetic changes.
*Added material to the picatinny rail.
*Squared off the front of the pic rail.
*Scalloped the pic rail slots.
*Elongated the trigger guard by 6mm. (Squeeze in some gloved fingies)
*Added aesthetic "padding" on the front and sides of the grip section.
*Added semi-wrapped ridging along the bottom half of the backstap.
*Added material to the rear of the frame.
Overall, this was more for my own purposes, but I decided to release this in case any weirdo wanted a similar look from the base frame.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 90%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
This file pack is for the frame only. Other printed part files will need to be downloaded from the base design release; link provided in the below text.
Base Bozkurt pistol frame files can be found on Odysee:
Odysee: https://odysee.com/@TheGatalog-PrintableFramesReceivers:9/The-Bozkurt-Canik-TP9:c
(Other print settings and the hardware list will be provided in the base data pack)
Accreditations:
Uberclay: Creator of the Bozkurt pistol frame; used the base frame model from their design release.
LBRY Tags: 3d printing; firearms; frame; canik; tp9; c:disable-reactions-comments; c:disable-slimes-video; c:disable-slimes-comments; c:disable-reactions-video