Only works for Re-Release lowers as of right now. Still working on fitment of OG Lowers. Will have a working version soon.

This is a complete overhaul of the magazines for deAR22 platform. These Smith & Wesson flavored magazines borrow all the great features (and look) of the M&P15-22 mags. High power z-springs, LRBHO, load assist, and solid track geometry for the follower.

For those who want to use these on builds that use the Scarpion 22 style lock-up, I've included another set of magazine bodies and followers that are compatible. However, those are untested at this time.

If you don't like the S&W look, there are unmarked/no logo versions of each magazine. A STEP file is included for easy remixing.

Print Settings:
Parts should load in your slicer in the recommended orientation for printing.
- Layer Height: 0.16mm
- Walls: 4
- Infill: 15% Gyroid
- Supports: Tree(Manual) On the base of the magazine only (see images)
Auto Tree supports on everything else.

Your slicer may not have this issue, but for me, the auto supports on the follower pegs do not seem to generate correctly and causes spaghetti noodling when printing. If you have this issue, refer to the images folder for the correct support settings on that part.

I also recommend you add a modifier block to the feed lips and make them print with maximum walls for longevity.

Link to Z-Springs:
https://www.aliexpress.us/item/3256806781239714.html?spm=a2g0o.order_list.order_list_main.5.475e1802Z1s0pv&gatewayAdapt=glo2usa

Feel free to reach out to me on here, Reddit, or GCI Forums with any issues or feedback on the magazines.

Thank you to BLC and General Custer for the base design of the 15-22 Mags and making my work on this project much easier.

LBRY Tags: dear22; magazine; scarpion; 22; 22lr