View this release
Alternative links
Hello, so are you having trouble finding a metal cam for the Hoffman Tactical Super Safety? Well, what to do the kids say? "We have Cam at home. Just as good"
Enclosed are the settings to print a Cam in Polymaker CoPA on a Bambu.
If you are doing it on an another printer, your fan speed may vary. But the goal is to have just a little bit of fan only on the outer layer.
So, yeah Polymaker CoPA has incredible durability, however its printability sucks. So the time to print one Cam is about 3 hours.
But the good news is that these Cams last for hundreds of rounds. I still recommend printing the Lever in a Carbon Fiber.
Also, I polished the trigger bar with a 2000 grit Lansky stone, I don't know if this is needed. But you will have to make sure it is baby smooth.
So until TwinBros is back online, this is an alternative.
And many thanks to Hoffman.
LBRY Tags: super saftey; hoffman tactical; 3d printed; tits
Enclosed are the settings to print a Cam in Polymaker CoPA on a Bambu.
If you are doing it on an another printer, your fan speed may vary. But the goal is to have just a little bit of fan only on the outer layer.
So, yeah Polymaker CoPA has incredible durability, however its printability sucks. So the time to print one Cam is about 3 hours.
But the good news is that these Cams last for hundreds of rounds. I still recommend printing the Lever in a Carbon Fiber.
Also, I polished the trigger bar with a 2000 grit Lansky stone, I don't know if this is needed. But you will have to make sure it is baby smooth.
So until TwinBros is back online, this is an alternative.
And many thanks to Hoffman.
LBRY Tags: super saftey; hoffman tactical; 3d printed; tits