View this release
Alternative links
I'm not responsible for anything, know your local laws.
ALTec-22 Version 1.2 - This is a printable Tec-22 Frame
V1.2 Adds Safety, removes wall between trigger pack and magazine, reshapes the under trunnion portion and some other small tweaks.
This has NOT been group tested and should be known as experimental.
I printed at 8 walls and 80%, the idea is that the 20% empty space will allow the barrel to press in without cracking. I used a heat gun to the barrel trunnion and then pushed the barrel in place with a dead blow and a broom stick. Careful with the safety springs, the flat spring wire breaks very easily. I made replacements using 1mm spring wire wound 2.5 times and the legs trimmed to width.
My parts kit likes Super X ammo the best but loads and extracts every type i tried. Ejection is best on super X in my scenario.
This was a mix of the FUG-22(AR LPK) and the Freeman AB10 Ghettoblaster, Huge shoutout to those guys!
Sorry, no STEP, I build this in tinkercad... I should call it the Tinker-22..
LBRY Tags: 3dp; guns; frame; reciever; intratec
ALTec-22 Version 1.2 - This is a printable Tec-22 Frame
V1.2 Adds Safety, removes wall between trigger pack and magazine, reshapes the under trunnion portion and some other small tweaks.
This has NOT been group tested and should be known as experimental.
I printed at 8 walls and 80%, the idea is that the 20% empty space will allow the barrel to press in without cracking. I used a heat gun to the barrel trunnion and then pushed the barrel in place with a dead blow and a broom stick. Careful with the safety springs, the flat spring wire breaks very easily. I made replacements using 1mm spring wire wound 2.5 times and the legs trimmed to width.
My parts kit likes Super X ammo the best but loads and extracts every type i tried. Ejection is best on super X in my scenario.
This was a mix of the FUG-22(AR LPK) and the Freeman AB10 Ghettoblaster, Huge shoutout to those guys!
Sorry, no STEP, I build this in tinkercad... I should call it the Tinker-22..
LBRY Tags: 3dp; guns; frame; reciever; intratec