64
5
Includes +2 baseplate and locking tab.
Made for P-09 and P-10f magazines. Will not fit metal-framed CZ magazines like the CZ-75 or SP-01.
Use OEM springs.
Has not been tested on other P-series magazines of other sizes, like the P-07. If CZ sells extended base plates for yours, it might work.
LBRY Tags: 3d; cz; full size; p-09; p-10f
Made for P-09 and P-10f magazines. Will not fit metal-framed CZ magazines like the CZ-75 or SP-01.
Use OEM springs.
Has not been tested on other P-series magazines of other sizes, like the P-07. If CZ sells extended base plates for yours, it might work.
LBRY Tags: 3d; cz; full size; p-09; p-10f
Related to This Release
316
2
ALT KABUTO TURD SELECTOR V1.1 Fixed
alternative selector for the Kabuto Filearms TURD
make sure your supports are dialed in and print at 0.2 layer height 100% infill
Link to the Kabuto …
191
4
USC Double Stack 20 Round Magazine
Here is the filepack for the USC magazine, 20 Round and 10 Round Single Stack options included. Parts to purchase in README.
Feedback appreciated: …
155
7
3d printed test for printing rails down
3d Printed test rails down.
Layer height 0.28
walls 2
infill 8%-15% depending of printing time
Printing time about 2 hrs (depending on slicer setti…
134
9
Wall Thickness calculator for devs V3
After a long wait, the calculator is finally out.
Designed specifically for 3D printed "cans" this tool gives you realistic, material-specific wall t…
35
1
Suomi KP31 Front trunnion 80% version
Has magwell, but lacks ejector, extraction groove, and ejection port.
LBRY Tags: guns; fosscad; finland; suomi; kp31
Twitter
Matrix
Source
