523
7
View this release
Alternative links
Corser2 Remix - added obtuse glock mag holder + pic rails on either side.
Increased height of rear section to allow for taller Dagger RMR Optics Plate cover with mounted charging handle (https://odysee.com/@M4ND0R04CH:9/Grand-Blorr:7)
Included are the proprietary mag releases for the obtuse mag holder. You cannot use glock mag releases. The ones provided vary in size
100% concentric infill
6 wall loops
print "rails down" (top pic rails parallel with print surface)
tree supports (auto) 25 degrees
Needs glock 19 gen 3 LPK with a gen 5 slide catch spring - locking block needed - note front mag holder requires additional mag release spring - print a mag release!!
Corser2 by Sum One: https://odysee.com/@SumOne:5/Courser-2:5
Obtuse Mag Holder by Stuff I Done Did: https://odysee.com/@Maverick0197:1/Obtuse_Mag_Holder:4
Increased height of rear section to allow for taller Dagger RMR Optics Plate cover with mounted charging handle (https://odysee.com/@M4ND0R04CH:9/Grand-Blorr:7)
Included are the proprietary mag releases for the obtuse mag holder. You cannot use glock mag releases. The ones provided vary in size
100% concentric infill
6 wall loops
print "rails down" (top pic rails parallel with print surface)
tree supports (auto) 25 degrees
Needs glock 19 gen 3 LPK with a gen 5 slide catch spring - locking block needed - note front mag holder requires additional mag release spring - print a mag release!!
Corser2 by Sum One: https://odysee.com/@SumOne:5/Courser-2:5
Obtuse Mag Holder by Stuff I Done Did: https://odysee.com/@Maverick0197:1/Obtuse_Mag_Holder:4
Related to This Release
1173
20
XD19x Package 1.1
XD19x Polymer80 Package 1.1
USES POLYMER80 PF940C RAILS.
Frame is a 19x so it uses Glock 17 Magazines
This Package comes with 5 different full grip s…
449
8
XD1933 BHive Package
XD1933 Polymer80 BHive Package
Comes with 3 different similar stipples.
USES POLYMER80 PF940c G19 RAILS.
The New Buzzzzzzzz!
This is what you would …
802
8
1
Polymer80 G19v3 AvA
POLYMER80 G19v3 A.V.A.
USES POLYMER80 G19 RAILS.
Print Settings
==============
Esun or Inland Brand PLA PLUS+++ preferred
Nozzle 220
Bed 62
Treesu…
45
4
RP19X PY2A 19.3
Long and smooth remix of Unseen's Mag Rip 19x frame.
Use PY2A 19.3 rails and your best judgement
2154
16
MAV9X - DremelSmith Remix
DremelSmith Remix of the Original MAV9 Glock frame.
19X Style frame with magwell file, for both, P80 Rails and FMDA DD19.2 rails. Make sure you print…
Twitter
Matrix
Source
