97
3
View this release
Alternative links
# cali-can
Direct thread .22lr suppressor.
by maximus
## Description
The cali-can is designed to be a zero post-process, direct thread, ultra-lightweight .22 suppressor for 1/2x28 threaded barrels. As printed, the can takes about 3 hours on an input shaping capable printer, and uses ~40 grams of filament.
## Materials Required
- x1 **filament** - Tested with nylon-cf and pla+ so far.
## Instructions
Filaments tested so far: nylon-CF, PLA+
- 5 walls
- 98% infill, rectilinear
- precision walls
- no support
- smooth build plate
- print threads down
Tip: print only the bottom of the can to test threadability first, can has been tested on multiple 1/2x28 threads so far. Highly recommend drying nylon filament to maintain dimensional tolerances.
LBRY Tags: guncad
Direct thread .22lr suppressor.
by maximus
## Description
The cali-can is designed to be a zero post-process, direct thread, ultra-lightweight .22 suppressor for 1/2x28 threaded barrels. As printed, the can takes about 3 hours on an input shaping capable printer, and uses ~40 grams of filament.
## Materials Required
- x1 **filament** - Tested with nylon-cf and pla+ so far.
## Instructions
Filaments tested so far: nylon-CF, PLA+
- 5 walls
- 98% infill, rectilinear
- precision walls
- no support
- smooth build plate
- print threads down
Tip: print only the bottom of the can to test threadability first, can has been tested on multiple 1/2x28 threads so far. Highly recommend drying nylon filament to maintain dimensional tolerances.
LBRY Tags: guncad
Related to This Release
1297
21
22LR 25MM CF Tube Suppressor
Utilizes 25mm OD CF tube found in Proto barrel. Length configurable, Printed end cap/muzzle end, TPU baffles sandwiched by allthread.
LBRY Tags: 2…
826
19
acoustic_suppressor_v3 .22 cal
1/2x28 threads and bored out for 22lr shoutout to SCSMD3D for his assistance
1461
28
RATS: Ruger Adaptive Threadless System
A threadless muzzle device mounting system for the Ruger 10/22 Rifle
LBRY Tags: 3d printed; 3d2a; fosscad; suppressor; 22lr
72
4
buff tube quiet can cap
this screws onto a buff tube, with a 1/2-inch hole size. i used a 1/2 x 36 downsize to 1/2 by 28 thread adaptor with thread protector. push the side …
203
7
flow through 6 inch 22 can
I'm not going to completely repeat myself here as this is in many aspects extremely similar to the redirect can, but this is an experimental design b…
Twitter
Matrix
Source
