View this release
Alternative links
@ArmThyRightHand Design with M3 Inserts
https://odysee.com/@ArmThyRightHand:a
Use two M3x50mm bolts for the ass.
Use two M3x4mm boles for the selector area to prevent overtravel. (just cut one shorter if needed)
Use an M4 Nut and M4x30mm Bolt for your Hammer pin instead of the pin included in your kit IMO. My pin wouldn't securely hold the thing in.
Cut your 26.5mm x 8.5mm steel cheek inserts from something thinner than 2mm. JB Weld or solder some PLA/PA6 on top to enclose them permanently.
https://odysee.com/@ArmThyRightHand:a
Use two M3x50mm bolts for the ass.
Use two M3x4mm boles for the selector area to prevent overtravel. (just cut one shorter if needed)
Use an M4 Nut and M4x30mm Bolt for your Hammer pin instead of the pin included in your kit IMO. My pin wouldn't securely hold the thing in.
Cut your 26.5mm x 8.5mm steel cheek inserts from something thinner than 2mm. JB Weld or solder some PLA/PA6 on top to enclose them permanently.