View this release
Alternative links
BS-17 Pistol Grip by Qwerm
A knock off of TangoDown's BG-17 AR pistol grip. This release also includes a STL that allows you to create a textured section on the grip.
Orientation: Print it facing up.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 4
Infill Percentage: 30%+
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Outside Only: Enabled
Fuzzy Skin Thickness: 0.1mm / 0.5mm
Fuzzy Skin Density: 10.0mm / 4mm
Read the included PDF guide on how to use multiple fuzzy skin settings.
LBRY Tags: 3d printing; ar15; guncad; 3dpg; pistol grip
A knock off of TangoDown's BG-17 AR pistol grip. This release also includes a STL that allows you to create a textured section on the grip.
Orientation: Print it facing up.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 4
Infill Percentage: 30%+
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Outside Only: Enabled
Fuzzy Skin Thickness: 0.1mm / 0.5mm
Fuzzy Skin Density: 10.0mm / 4mm
Read the included PDF guide on how to use multiple fuzzy skin settings.
LBRY Tags: 3d printing; ar15; guncad; 3dpg; pistol grip