View this release
Alternative links
Storage Grip V2 (3DP PCC): Laffs Dynamics
The original Laffs Dynamics Storage Grip V2, adapted to work with 3D printed pistol caliber carbines.
Mounts to:
* MOD-9 Platform
* WTF-9
* FGC-9 Platform
* Partisan-9
* Shuty AP9
* KC9
Has two different textured locking tab hatches.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 32%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1x M3x12mm (or M3x15mm) Hex Set Screw
Notes:
1) Storage Grip V2 can hold roughly a little over half a standard pack of Skittles.
2) The original Storage Grip V2 can be found here: https://defcad.com/library/b105b346-b4b4-4d46-952c-b84063624573/
LBRY Tags: 3d printing; firearms; storage; grip; pcc
The original Laffs Dynamics Storage Grip V2, adapted to work with 3D printed pistol caliber carbines.
Mounts to:
* MOD-9 Platform
* WTF-9
* FGC-9 Platform
* Partisan-9
* Shuty AP9
* KC9
Has two different textured locking tab hatches.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 32%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1x M3x12mm (or M3x15mm) Hex Set Screw
Notes:
1) Storage Grip V2 can hold roughly a little over half a standard pack of Skittles.
2) The original Storage Grip V2 can be found here: https://defcad.com/library/b105b346-b4b4-4d46-952c-b84063624573/
LBRY Tags: 3d printing; firearms; storage; grip; pcc