View this release
Alternative links
read the PDF manual for more details. but with these tools and instructions should it not be that hard to make your own extractor for the FGC9 platform.
it also includes a section about clearing malfunctions with a FGC-9
note: to my knowledge does this have seen only some limited testing. the feedback so far was that not hard to make. but it have a potential to get damaged. so by no means do I believe this is 100% done and can’t be improved up on. but I would like to see were some people would take this concept.
the dummy-blank-round-v4.STL is to help guide a empty round in the chamber with just a primer installed so you can test out your head spacing. why not just hand chamber the round? the extractor makes this really hard to do. so either do this before making the extractor or use this to feed the “blanks” from the mag to the chamber.
LBRY Tags: fgc; fgc-9; fgc-9 mkii; fgc-9 mki; fgc-9 mkiisd
it also includes a section about clearing malfunctions with a FGC-9
note: to my knowledge does this have seen only some limited testing. the feedback so far was that not hard to make. but it have a potential to get damaged. so by no means do I believe this is 100% done and can’t be improved up on. but I would like to see were some people would take this concept.
the dummy-blank-round-v4.STL is to help guide a empty round in the chamber with just a primer installed so you can test out your head spacing. why not just hand chamber the round? the extractor makes this really hard to do. so either do this before making the extractor or use this to feed the “blanks” from the mag to the chamber.
LBRY Tags: fgc; fgc-9; fgc-9 mkii; fgc-9 mki; fgc-9 mkiisd