View this release
Alternative links
Mendicant Veil, the beggar's shroud v1.6 by Beecher
"Don't let the ONI spooks get to ya Rook, they shoot the same Misriah polybrick shithouses we do".
Release Notes v1.6
Released dust cap variants with push tabs for easier removal, let me know if they don't fit or aren't convenient to use and we'll tweak it.
1in, 24mm, 30mm, 33mm, 34mm, 49.5mm - Scary plastic hexagons inside a circle
Inquire for additional tube sizes
Smooth ARDs lack the raised teeth if you prefer a sleeker look and don't have any trouble tightening the assembly.
Additional notes:
As of this 1.6 release I am still exprimenting with the dimensions of the mesh. We're now up to 3mm hexagons, with .2mm lattice wall thickness.
There are also experimental mesh depths in the 49.5mm size, between 5-9mm. If the full depth 9mm mesh doesn't work for you let me know and I'll update the diameter you need with the shallower mesh depths.
You'll want to print in PETG, ASA, ABS, PA, PET, or another material that can withstand UV radiation. Scopes bake in the sun, PLA will melt.
Ensure not to use filled filaments with 0.2mm nozzles.
For a 33mm ARD, use a 6" (152mm) length of 1/8" (approximately 3mm) diameter shock cord to secure the cap to the anchor nut.
Tie a knot close to one end, feed the cord through, pull tight and knot in the other end. Trim excess, melt the shell with a lighter.
LBRY Tags: killflash; ard; red dot; fosscad; black lotus coalition
"Don't let the ONI spooks get to ya Rook, they shoot the same Misriah polybrick shithouses we do".
Release Notes v1.6
Released dust cap variants with push tabs for easier removal, let me know if they don't fit or aren't convenient to use and we'll tweak it.
1in, 24mm, 30mm, 33mm, 34mm, 49.5mm - Scary plastic hexagons inside a circle
Inquire for additional tube sizes
Smooth ARDs lack the raised teeth if you prefer a sleeker look and don't have any trouble tightening the assembly.
Additional notes:
As of this 1.6 release I am still exprimenting with the dimensions of the mesh. We're now up to 3mm hexagons, with .2mm lattice wall thickness.
There are also experimental mesh depths in the 49.5mm size, between 5-9mm. If the full depth 9mm mesh doesn't work for you let me know and I'll update the diameter you need with the shallower mesh depths.
You'll want to print in PETG, ASA, ABS, PA, PET, or another material that can withstand UV radiation. Scopes bake in the sun, PLA will melt.
Ensure not to use filled filaments with 0.2mm nozzles.
For a 33mm ARD, use a 6" (152mm) length of 1/8" (approximately 3mm) diameter shock cord to secure the cap to the anchor nut.
Tie a knot close to one end, feed the cord through, pull tight and knot in the other end. Trim excess, melt the shell with a lighter.
LBRY Tags: killflash; ard; red dot; fosscad; black lotus coalition