View this release
Alternative links
This is the 3mf sliced file for my FTN.4 22 caliber Remix. The file is sliced for PA6-CF or PPA-Cf and I print it at 45 degrees due to the pressure not being high enough to have to print flat. It makes use of a 42x40mm carbon tube to reinforce it and a 3/4x16 to 1/2x28 thread adapter so that the threads a more aggressive. I will also upload a STL file for people wanting to print in PLA pro or etc. I use JB Weld for the tube and the thread adapter because it stays spread out evenly better than epoxy. I spread all around the inside of the tube and on the outside of the core then slide the tube on. I tape the outside of the tube first till I get all the excess JB weld cleaned up so the tube looks good once done. I also spread JB weld on the thread adapters outside threads to help keep it secured.