View this release
Alternative links
This here is tiny, fully DIY electrically primed shotgun project. No firearm parts are needed, cartridges are printed too.
Only things needed are some 4 and 3 mm screws, 10.4mm ID seamless pipe, a couple of pen springs and an arc lighter.
Assembly information and useful tips are included in pictures and .skp file.
Built at your own risk. Although this design has been tested, excessive powder loads and uncareful handling may cause loss of fingers, limbs and eyes. Use black powder or smaller amount of smokeless/black powder mixture for best results.
As of 2022/02/08 barrel retainer and lock has been updated. Do not print older versions of these stl's as they have tendency to break and eject spent shell backwards into shooters face.
LBRY Tags: fosscad; free speech; black powder
Only things needed are some 4 and 3 mm screws, 10.4mm ID seamless pipe, a couple of pen springs and an arc lighter.
Assembly information and useful tips are included in pictures and .skp file.
Built at your own risk. Although this design has been tested, excessive powder loads and uncareful handling may cause loss of fingers, limbs and eyes. Use black powder or smaller amount of smokeless/black powder mixture for best results.
As of 2022/02/08 barrel retainer and lock has been updated. Do not print older versions of these stl's as they have tendency to break and eject spent shell backwards into shooters face.
LBRY Tags: fosscad; free speech; black powder