View this release
Alternative links
Evo Picatinny AFG V1.2.1: Laffs Dynamics
An angled foregrip designed specifically to match up to the OEM CZ Scorpion Evo III Pistol/SMG handguard.
Utilizes the entire bottom picatinny rail on the handguard. Has front and rear hand stops, also has ridges
that wrap around the AFG.
(Can be used on other weapon picatinny handguards)
Update V1.2.1: Tightened picatinny rail slot tolerances. Thickened handstops ends by 2mm. Relabeled designer's brand.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; afg; cz; firearms; scorpion
An angled foregrip designed specifically to match up to the OEM CZ Scorpion Evo III Pistol/SMG handguard.
Utilizes the entire bottom picatinny rail on the handguard. Has front and rear hand stops, also has ridges
that wrap around the AFG.
(Can be used on other weapon picatinny handguards)
Update V1.2.1: Tightened picatinny rail slot tolerances. Thickened handstops ends by 2mm. Relabeled designer's brand.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; afg; cz; firearms; scorpion