View this release
Alternative links
"Mountain Scout" Compact Fixed Carbine Buttstock: Laffs Dynamics
A compact version of the Laffs Dynamics original Mountain Scout Compact Fixed Carbine Buttstock. Reduced in overall length by
24mm. (Roughly 1in.)
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
LBRY Tags: 3d printing; firearms; buttstock; carbine
A compact version of the Laffs Dynamics original Mountain Scout Compact Fixed Carbine Buttstock. Reduced in overall length by
24mm. (Roughly 1in.)
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
LBRY Tags: 3d printing; firearms; buttstock; carbine