43
2
View this release
Alternative links
This is a small remix of my original AmbiSide Bolt with space to add a nickel for reinforcement.
The bolt should be printed following original instructions with a pause added at layer 51. Before adding the nickel I recommend having absolutely fabulous bridging settings, or covering the nickel in a very thin layer of gluestick to help the plastic adhere to the surface of the nickel. After printing, insert and JB Weld the Bolt protrusion as normal. After curing run the firing pin drill bit through the bolt protrusion through the nickel and clean the hole to ensure the firing pin moves freely. Headspace per original instructions.
Feel free to leave any any criticism or probs you encounter in the comments.
No guarantee I'll fix 'em if you shout 'em out, but I DO guarantee I won't fix 'em if you don't bitch about 'em.
LBRY Tags: decker; decker 380
The bolt should be printed following original instructions with a pause added at layer 51. Before adding the nickel I recommend having absolutely fabulous bridging settings, or covering the nickel in a very thin layer of gluestick to help the plastic adhere to the surface of the nickel. After printing, insert and JB Weld the Bolt protrusion as normal. After curing run the firing pin drill bit through the bolt protrusion through the nickel and clean the hole to ensure the firing pin moves freely. Headspace per original instructions.
Feel free to leave any any criticism or probs you encounter in the comments.
No guarantee I'll fix 'em if you shout 'em out, but I DO guarantee I won't fix 'em if you don't bitch about 'em.
LBRY Tags: decker; decker 380
Related to This Release
75
2
Stience15/DAO8 Barrel-Upload
So i found a minor flaw that impacted the realiability of the striker in the alignment of barrel and frame so here is the fixed upload.
I also inclu…
85
3
Mashed Hoffman DR-9
Mashup of Hoffman V1.2 and Hoffman Double Ribbed V3.0.3. Use V1.2 Readme for everything except the Hose Clamp. Requires larger #28 (2-1/4") hose clam…
25
Marvel_Revolver
this is the original CAD for the Marvel Revolver Hong Kong Model 3d printable pistol.
Credit to Yoshitomo Imura, the designer. Manufacturer Imura Wo…
621
4
Pm522 washbear
this is the original CAD for the PM522 washbear 3d printable pistol.
Credit to JamesRPatrick, the designer.
66
5
SST ARDX (18mm)
Includes its own supports. Use 0.16-0.2 mm layer height, 0.4 mm nozzle. PLA is sufficient.
Twitter
Matrix
Source
