View this release
Alternative links
Rook AKM Grip V1.1: FFFTech/FFFTechnology
An AKM grip with a straight backstrap and frontal section. Has ridges down the front, with an outwards extended toe.
A thumb rest is modeled into the left side of the grip. (See Note Below)
Overall thickness is 25.2mm
Update V1.1: Removed reinforcements.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
Notes:
1) For left handed shooters, simply use the "Mirror" setting in your preferred slicer software, so the thumb rest is
on the right side of the grip.
LBRY Tags: 3d printing; ak; ak47; firearms; grip
An AKM grip with a straight backstrap and frontal section. Has ridges down the front, with an outwards extended toe.
A thumb rest is modeled into the left side of the grip. (See Note Below)
Overall thickness is 25.2mm
Update V1.1: Removed reinforcements.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
Notes:
1) For left handed shooters, simply use the "Mirror" setting in your preferred slicer software, so the thumb rest is
on the right side of the grip.
LBRY Tags: 3d printing; ak; ak47; firearms; grip