View this release
Alternative links
Traction Grip Panels (Beretta 92FS): Laffs
Grip panels for the Beretta 92FS pistols. Has upward facing deep ridges for better retention under recoil in wet environments. (Compared to
panels with little to no texturing on it's surface.)
Compatible with Beretta 90 Series Frames (Including Unlisted Submodels):
*92FS
*92A1
*92G
*96
*M9
*Sphynx (3D Printed Beretta 92/M9 Frame) (See Notes)
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 45%
Support Material Percentage: 18%
Hardware Needed:
4x Beretta 92 Grip Panel Screws
Notes:
The Sphynx 3D printed frame can be found here: https://odysee.com/@TheGatalog-PrintableFramesReceivers:9/Sphynx_V1:6
Accreditations:
Gerald.Katz: Provided base template data for geometric refinement. Provided information on design origin.
LBRY Tags: 3d printing; firearms; beretta; 92fs; grip panels; c:disable-slimes-comments; c:disable-slimes-video; c:disable-reactions-video; c:disable-reactions-comments
Grip panels for the Beretta 92FS pistols. Has upward facing deep ridges for better retention under recoil in wet environments. (Compared to
panels with little to no texturing on it's surface.)
Compatible with Beretta 90 Series Frames (Including Unlisted Submodels):
*92FS
*92A1
*92G
*96
*M9
*Sphynx (3D Printed Beretta 92/M9 Frame) (See Notes)
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 45%
Support Material Percentage: 18%
Hardware Needed:
4x Beretta 92 Grip Panel Screws
Notes:
The Sphynx 3D printed frame can be found here: https://odysee.com/@TheGatalog-PrintableFramesReceivers:9/Sphynx_V1:6
Accreditations:
Gerald.Katz: Provided base template data for geometric refinement. Provided information on design origin.
LBRY Tags: 3d printing; firearms; beretta; 92fs; grip panels; c:disable-slimes-comments; c:disable-slimes-video; c:disable-reactions-video; c:disable-reactions-comments