View this release
Alternative links
CZ 600 7.62x39 5 & 12 Round Magazines
Materials: PLA, Polycarbonate, PA, PPA, and other Nylons
(Carbon Fiber Filaments not recommended)
For PLA it is recommended to raise the printing temp to 230-235 for best layer adhesion
Print Orientation: Use the default STL print orientation, for the body they can be printed on a 30* angle to improve feed lib durability if needed
Spring: They use standard AR15 springs cut down to length (these lengths are not exact, start long and cut shorter if needed)
5 Round Magazine (60-70mm Spring Length)
12 Round Magazine (110-130mm Spring Length)
*FITTING* With the new design the magazines may need slight sanding on the rear depending on your printers accuracy.
changelog
- removed rear locking lug from magazine and extended it to match the newer cz600 + model of mags
- added spring retainer to follower and floorplate
- made the baseplate reversible so it can now be installed from either direction
LBRY Tags: 3d2a; 3dprinted; magazine; cz600
Materials: PLA, Polycarbonate, PA, PPA, and other Nylons
(Carbon Fiber Filaments not recommended)
For PLA it is recommended to raise the printing temp to 230-235 for best layer adhesion
Print Orientation: Use the default STL print orientation, for the body they can be printed on a 30* angle to improve feed lib durability if needed
Spring: They use standard AR15 springs cut down to length (these lengths are not exact, start long and cut shorter if needed)
5 Round Magazine (60-70mm Spring Length)
12 Round Magazine (110-130mm Spring Length)
*FITTING* With the new design the magazines may need slight sanding on the rear depending on your printers accuracy.
changelog
- removed rear locking lug from magazine and extended it to match the newer cz600 + model of mags
- added spring retainer to follower and floorplate
- made the baseplate reversible so it can now be installed from either direction
LBRY Tags: 3d2a; 3dprinted; magazine; cz600