View this release
Alternative links
A2 VFG by Qwerm
Vertical foregrips in the styling of an A2 pistol grip. Includes Picatinny, M-LOK, and Keymod in vertical and 15 degree mounting. The 15 degree M-LOK version will need a ball end hex key to install.
Disclaimer: I cannot guarantee that the M-LOK version fits well.
Orientation: Print standing up.
Settings Used:
Material: PLA+
Extruder Temp: 60c
Bed Temp: 210c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Outside Only: Enabled
Fuzzy Skin Thickness: 0.1mm
Fuzzy Skin Density: 10.0/mm
For the Picatinny version you will need:
1x M5 x 25mm Button Head Bolt
1x M5 Nut
Credits:
FFFTech for the Picatinny template.
Jstark / DetDisp for the A2 pistol grip.
LBRY Tags: 3d printed; vfg; a2
Vertical foregrips in the styling of an A2 pistol grip. Includes Picatinny, M-LOK, and Keymod in vertical and 15 degree mounting. The 15 degree M-LOK version will need a ball end hex key to install.
Disclaimer: I cannot guarantee that the M-LOK version fits well.
Orientation: Print standing up.
Settings Used:
Material: PLA+
Extruder Temp: 60c
Bed Temp: 210c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Outside Only: Enabled
Fuzzy Skin Thickness: 0.1mm
Fuzzy Skin Density: 10.0/mm
For the Picatinny version you will need:
1x M5 x 25mm Button Head Bolt
1x M5 Nut
Credits:
FFFTech for the Picatinny template.
Jstark / DetDisp for the A2 pistol grip.
LBRY Tags: 3d printed; vfg; a2