View this release
Alternative links
Remington 870 Optic Rail: Laffs Dynamics
Rail for the Remington 870 shotgun, for use with small form factor optics such as the Sig Romeo 5, Holosun HS403B, etc.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 100%
Hardware Needed:
3x #6-48 x 1/4" Fillister Head Gun Screws
Note: This is for newer Remington 870s that have 3 pre-drilled and tapped mount holes instead of the older 4 hole config.
LBRY Tags: 3d printing; firearms; remington; 970; rail
Rail for the Remington 870 shotgun, for use with small form factor optics such as the Sig Romeo 5, Holosun HS403B, etc.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 100%
Hardware Needed:
3x #6-48 x 1/4" Fillister Head Gun Screws
Note: This is for newer Remington 870s that have 3 pre-drilled and tapped mount holes instead of the older 4 hole config.
LBRY Tags: 3d printing; firearms; remington; 970; rail