View this release
Alternative links
Smol Waffle Stick Mag (CZ Scorpion Evo): Laffs Dynamics
A 20rd straight box magazine with dense waffle patterned reinforcements for the CZ Scorpion Evo.
Test fired with 400+ rounds.
Tested with OEM CZ Scorpion Evos.
The magazine is compatible with mag springs from:
*Sig Sauer P320 17rd mags
*OEM CZ Scorpion Evo 3 20rd mags
*Aftermarket CZ Scorpion Evo 3 springs (See Notes)
*Beretta 92 Series 15rd mags
*Magpul PMAG GL9 15rd mags
*Magpul PMAG GL9 17rd mags
*Magpul PMAG GL9 21rd mags
*Magpul PMAG GL9 27rd mags (Damn that was surprising)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 75%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
1) Aftermarket mag springs can be purchased from: https://czcustom.com/cz-parts-all/cz-springs-all/evo-mag-ext-spring.html
Hardware Needed:
1x 20rd Scorpion Evo Mag Spring
Accreditations:
InsertMeow: Reverse engineered top of his Scorpion Evo magazine feed tower.
StayFree3DP: Printed and assembled the magazine. Loaded and test fired in an OEM Scorpion Evo. Provided images and video footage.
Notsogod: Printed and assembled the magazine. Loaded and test fired in an OEM Scorpion Evo. Provided images.
ProSpaceDog: Loaded and test fired in an OEM Scorpion Evo. Provided video footage.
Moral Support: Dianexis, GW-DD, Punished_DP_Roberts.
LBRY Tags: 3d printing; firearms; cz; scorpion evo; mag
A 20rd straight box magazine with dense waffle patterned reinforcements for the CZ Scorpion Evo.
Test fired with 400+ rounds.
Tested with OEM CZ Scorpion Evos.
The magazine is compatible with mag springs from:
*Sig Sauer P320 17rd mags
*OEM CZ Scorpion Evo 3 20rd mags
*Aftermarket CZ Scorpion Evo 3 springs (See Notes)
*Beretta 92 Series 15rd mags
*Magpul PMAG GL9 15rd mags
*Magpul PMAG GL9 17rd mags
*Magpul PMAG GL9 21rd mags
*Magpul PMAG GL9 27rd mags (Damn that was surprising)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 75%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
1) Aftermarket mag springs can be purchased from: https://czcustom.com/cz-parts-all/cz-springs-all/evo-mag-ext-spring.html
Hardware Needed:
1x 20rd Scorpion Evo Mag Spring
Accreditations:
InsertMeow: Reverse engineered top of his Scorpion Evo magazine feed tower.
StayFree3DP: Printed and assembled the magazine. Loaded and test fired in an OEM Scorpion Evo. Provided images and video footage.
Notsogod: Printed and assembled the magazine. Loaded and test fired in an OEM Scorpion Evo. Provided images.
ProSpaceDog: Loaded and test fired in an OEM Scorpion Evo. Provided video footage.
Moral Support: Dianexis, GW-DD, Punished_DP_Roberts.
LBRY Tags: 3d printing; firearms; cz; scorpion evo; mag