View this release
Alternative links
UBAR-LFS: Laffs Dynamics
QoL improved variant of the original UBAR AR-15 3DP lower receiver.
Has H&K style fire selector markings, an opened up trigger guard, and lightening cuts in the magwell for less material usage during printing.
A small amount of material is removed from the rear of the receiver to allow for full tang AR grips to be utilized.
In the original UBAR design, the inside top section of the trigger guard (Where the trigger meets the receiver.) was wide open; this has been closed
off to keep debris from entering the fire control group.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 60%+
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release;
links provided in the below text.
Base UBAR files can be found on Odysee:
Odysee: https://odysee.com/@TheGatalog-PrintableFramesReceivers:9/UBAR-Rev1:e
(Other print settings and the hardware list will be provided in the base data pack)
Accreditations:
Ivan: Lead designer of the UBAR/UBolt V2 AR Lower Receiver; used his base model to create this variant.
RK Spookware: Provided base hardware for AR lower receiver.
LBRY Tags: 3d printing; firearms; ubar; ar-15; reciever
QoL improved variant of the original UBAR AR-15 3DP lower receiver.
Has H&K style fire selector markings, an opened up trigger guard, and lightening cuts in the magwell for less material usage during printing.
A small amount of material is removed from the rear of the receiver to allow for full tang AR grips to be utilized.
In the original UBAR design, the inside top section of the trigger guard (Where the trigger meets the receiver.) was wide open; this has been closed
off to keep debris from entering the fire control group.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 60%+
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release;
links provided in the below text.
Base UBAR files can be found on Odysee:
Odysee: https://odysee.com/@TheGatalog-PrintableFramesReceivers:9/UBAR-Rev1:e
(Other print settings and the hardware list will be provided in the base data pack)
Accreditations:
Ivan: Lead designer of the UBAR/UBolt V2 AR Lower Receiver; used his base model to create this variant.
RK Spookware: Provided base hardware for AR lower receiver.
LBRY Tags: 3d printing; firearms; ubar; ar-15; reciever