516
12
View this release
Alternative links
@ArmThyRightHand Design with M3 Inserts
https://odysee.com/@ArmThyRightHand:a
Use two M3x50mm bolts for the ass.
Use two M3x4mm boles for the selector area to prevent overtravel. (just cut one shorter if needed)
Use an M4 Nut and M4x30mm Bolt for your Hammer pin instead of the pin included in your kit IMO. My pin wouldn't securely hold the thing in.
Cut your 26.5mm x 8.5mm steel cheek inserts from something thinner than 2mm. JB Weld or solder some PLA/PA6 on top to enclose them permanently.
https://odysee.com/@ArmThyRightHand:a
Use two M3x50mm bolts for the ass.
Use two M3x4mm boles for the selector area to prevent overtravel. (just cut one shorter if needed)
Use an M4 Nut and M4x30mm Bolt for your Hammer pin instead of the pin included in your kit IMO. My pin wouldn't securely hold the thing in.
Cut your 26.5mm x 8.5mm steel cheek inserts from something thinner than 2mm. JB Weld or solder some PLA/PA6 on top to enclose them permanently.
Related to This Release
305
13
PSACR_JAKL_Handguard
Shitty handguard for your ACR we have at home from PSA
336
7
M2O3_Heatshield_Handguad
M2Oh3 handguard to larp as Arnold in the jungle.
160
6
Roller_Display_Stand
No description provided for this release
1665
17
MP5.7_Chassis-PSA_Rock_5.7
AUGUST 13th, 2024 UPDATE: Endcap_F has been updated, I don't know how I didn't save the correct file, but managed to print it; but this has been adju…
551
8
VZ61 Straightening jig
VZ61 straightening jig. For if you some how fucked your upper like M70 did.
Reference: Jozef Pales https://grabcad.com/library/vz-61-skorpion-smg-1/…
Twitter
Matrix
Source
