1386
19
View this release
Alternative links
Tidal Wave M-Lok AFG V1.0.1: FFFTech/FFFTechnology
A basic curved angled foregrip with a handstop towards the front. Has deep ridging along the curved section.
Update: Changed header title to include "M-Lok".
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 26%
Print the AFG upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
LBRY Tags: 3d printing; afg; angled foregrip; firearms; m-lok
A basic curved angled foregrip with a handstop towards the front. Has deep ridging along the curved section.
Update: Changed header title to include "M-Lok".
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 26%
Print the AFG upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
LBRY Tags: 3d printing; afg; angled foregrip; firearms; m-lok
Related to This Release
308
19
FBS-4 (AKM) V1.0.1
FBS-4 (AKM) V1.0.1: Laffs Dynamics
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original RPK LMG buttstocks.
Printer Used:…
637
17
"Beat'n Muh Meat" Knuckleduster
"Beat'n Muh Meat" Knuckleduster V1.0.1: Laffs
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer …
237
11
FBS-2 (AKM) (Rev 1)
FBS-2 (AKM) (Rev 1): Laffs Dynamics
Revision of the original Laffs Dynamics FBS-2 AKM Buttstock. Follows the original's design parameter of a higher…
730
18
MR-1 (CZ Scorpion Evo)
MR-1 (CZ Scorpion Evo): Laffs Dynamics
First Laffs Dynamics magazine release for the CZ Scorpion Evo 3.
Printer Used: Ender 3 V2
Filament Used:…
84
.40 S&W Dummy Ammunition
.40 S&W Dummy Ammunition: Laffs
3D printed dummy ammunition, dimensions of a .40 S&W cartridge. Can be used for dryfire or malfunction training, or …
Twitter
Matrix
Source
