10
1
View this release
Alternative links
I wanted a barrel shroud that would accept my more common threaded muzzle devices. Am currently running a 16x1mm RH thread shroud on my VP22 printed in Elegoo PLA Pro with no issues yet. I wanted the shroud to be as thick as possible so I settled on 16x1 RH. That said, I also included a 1/2x28 threaded shroud for more common attachments.
I strongly urge you to verify thread concentricity prior to actual usage.
Even though I have successfully installed and used the 16x1mm shroud, these should be considered untested - please use at your own risk.
I strongly urge you to verify thread concentricity prior to actual usage.
Even though I have successfully installed and used the 16x1mm shroud, these should be considered untested - please use at your own risk.
Related to This Release
412
11
1
UAV Pack (Only UAVs)
Includes the Drones from the last pack, plus about 10 more models. (Just drones, no attachments or munitions in this pack)
LBRY Tags: drone; uav; rc…
320
9
MNC Shroud_Krrawn_MPA
A Modified version of the "Large" shroud made to fit MPA uppers.
349
7
VZ61 Threaded Barrel Adapter
This is an UNTESTED (aside from fit checks) design to mount a threaded adapter to a factory vz61 barrel. I'd recommend printing in cf nylon or simila…
195
5
Gnaverblaster Threaded Barrel
@AreWeCoolYet:7 Gnaverblaster remix featuring a 3/4x16 threaded barrel. I recommend using a Parts Dispensed Chambered Aurora Liner.
LBRY Tags: 3d2a;…
1
1
1.875" ID Sander
** CLICK THE PHOTO TO DOWNLOAD **
LBRY Tags: c:unlisted
Twitter
Matrix
Source
