448
19
View this release
Alternative links
The DD is a thompson smg style VFG that can be attached to a standard plastic two piece AR15 handguard or similar, or an Mlok style rail.
Use 1/4" bolts tapped into the original version to attach it from the inside of a handguard, or print the Mlok version, and use generic or magpul Tnuts with bolts of a suitable length for the thickness of the rail.
Rough dimensions 6" long front to back, 4-3/4" height, 1-1/8" width.
I might make an 'AFG' version if requested
LBRY Tags: mlok; thompson; grip; stubbs; dillinger
Use 1/4" bolts tapped into the original version to attach it from the inside of a handguard, or print the Mlok version, and use generic or magpul Tnuts with bolts of a suitable length for the thickness of the rail.
Rough dimensions 6" long front to back, 4-3/4" height, 1-1/8" width.
I might make an 'AFG' version if requested
LBRY Tags: mlok; thompson; grip; stubbs; dillinger
Related to This Release
1101
24
Strider Grip (AR-15)
Strider Grip (AR-15): Laffs Dynamics
A swept back, full length AR-15 grip with an extended toe to avoid hand slippage. Swells out from 22.3mm to 28.…
1193
16
Push Pop Angled Grip
The Push Pop Angled Grip is a stubby grip with a hand stop, perfect for your C-clamp life and/or use on gats with shorter handguards.
LBRY Tags: 3d2…
225
11
Bullpup Can Cannon DLC Rails
These are optional side rails for the 'SCRUNGLER' Bullpup Can Cannon.
There is a new tri-rail for mounting on both sides, and one with only a left a…
120
6
1
MOE AAA Grip Insert
MOE AAA Grip Insert by Qwerm
An insert for a Magpul MOE grip that holds three AAA batteries.
Print Orientation: Print everything on it's flat side.…
1421
31
GP37 Re-Release
The GP37 is a caseless 37mm launcher that uses fence post pipes as is common for launchers, but is based on a caseless eastern format launcher. The G…
Twitter
Matrix
Source
