574
16
View this release
Alternative links
Talon M-Lok Mini AFG: Laffs Dynamics
An angled foregrip; small in size, concave in shape. Has thumb cuts and a swelled palm section.
Curved heel with a sharp angled toe.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 55C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 28%
Support Material Percentage: 30%
Print the grip upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Swarmtech: Requested a similar design creation. Gave aesthetic opinions. Provided design parameters for overall size.
LBRY Tags: 3d printing; firearms; m-lok; mini; afg
An angled foregrip; small in size, concave in shape. Has thumb cuts and a swelled palm section.
Curved heel with a sharp angled toe.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 55C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 28%
Support Material Percentage: 30%
Print the grip upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Swarmtech: Requested a similar design creation. Gave aesthetic opinions. Provided design parameters for overall size.
LBRY Tags: 3d printing; firearms; m-lok; mini; afg
Related to This Release
707
21
FBS-1 (AKM) V1.1.3
FBS-1 (AKM) V1.1.3: Laffs Dynamics
A fixed buttstock, similar in overall geometry to standard AKM buttstocks. The overall length of the design is ~1…
362
4
Micro Camo Heritage Rough Rider Grip Panels
Micro Camo Heritage Rough Rider Grip Panels: Laffs Dynamics
Grip panels for the Heritage Rough Rider .22 caliber revolver. Has micro camo pattern.
…
99
5
MDH Barricade AFG Rev 1,1
An AFG incorporating a barricade stop. Both with and without a nose, which can be positioned to extend past your handguard. STEPs included. Rev 1,1 …
368
10
Dripp Gripp V1 [M-LOK]
An easy to print M-LOK angled grip.
8/25/2025: Fixed the Laffs-inspired ridge texture. Original was shallow and lacked texture on thumb ring in rea…
344
6
Laffs J Frame Speed Loader V2.0.1
Laffs J Frame Speed Loader V2.0.1: Laffs Dynamics
Version 2 of the original Laffs Dynamics J Frame Speed Loader; designed specifically for 5rd, .38S…
Twitter
Matrix
Source
