61
1
Compensator for the TX22. Heavily inspired by the comp designed by Pembleton, but redesigned from scratch because I wanted to change some of the dimensions and lines a bit to align with the slide better and added a step on the rear face for the wider barrel portion so you can screw it almost right up to the face of the slide.
1/2"-28 threads should screw on snugly as printed, but for cleaner threads chase it out with a tap. Print the face with the threaded hole down and with tree supports on overhangs but not in the threads themselves. Uses an M4x25 screw and nut to tighten down.
Printed a few with PPA-CF and they hold up quite well.
LBRY Tags: tx22; compensator; guncad
1/2"-28 threads should screw on snugly as printed, but for cleaner threads chase it out with a tap. Print the face with the threaded hole down and with tree supports on overhangs but not in the threads themselves. Uses an M4x25 screw and nut to tighten down.
Printed a few with PPA-CF and they hold up quite well.
LBRY Tags: tx22; compensator; guncad
Related to This Release
277
5
Bastard son stock v2
This is my newest version of this stock, holds 15 rounds of 22lr and will fit any gun with a pic rail on the frame. Requires a m3 bolt
LBRY Tags: f…
301
4
1022 Lock Pick STL
STL of the 1022 Lock Pick
LBRY Tags: 1022; 3d2a; 10/22; ruger
109
5
Minotaur22 Remix
This remix just make it a bit easier to print rails down, as well as makes the tail
removable so you are able to remove the back plate to remove a s…
89
6
TX22 Striker Guide Rod/Plunger
TX22 Replacement Striker Guide Rod/Plunger.
Print it slow and hot
LBRY Tags: 3d2a; guncad; tx22
95
2
TX22 - SLIDE CAP RETAINER (REPLACEMENT)
SLIDE CAP RETAINER. FUCKIN THING SHOT ACROSS THE ROOM. EAT A DICK, STRIKER SPRING. PART 41 IN TX22 GEN 2 EXPLODED DIAGRAM
LBRY Tags: tx22; slide cap…
Twitter
Matrix
Source
