90
this lower will work with the basic FGC68 upper and parts.
but this lower will make it possible to shoot with your TMC mags for a higher round count.
the starter set can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
the collection of FGC68 parts can be found here:
FGC68 MKII
https://www.printables.com/social/180009-untangleworks/collections/88908
FGC68 MKI
https://www.printables.com/social/180009-untangleworks/collections/88907
a video about this lower will be made later:
the ABD installation video can be found here:
https://www.youtube.com/watch?v=5IxGVSHOZ00&t=3s
some of the installation steps that are different from the TIPX lower can be fund in the images for now
parts needed for mag catch.
1x spring 6mm OD, 0.5mm wire, 20mm long
1x m3 bolt in a length of 30mm
1x m3 washer
1x metal pin 4mm OD, 27mm long (a 3d printed part can be used for this)
movies:
UNW FGC68MKII new lowers for the T15, TMC and Dmag / helix mags for this magfed paintball marker
https://www.youtube.com/watch?v=xjbmq-A3C3c
https://odysee.com/@UntangleWORKS:a/UNW-FGC68MKII-new-lowers-low:f
FGC68 a small update on the installation of the new lowers for TMC T15 Dmag mags
https://www.youtube.com/watch?v=PwSyvEeVHTk
https://odysee.com/@UntangleWORKS:a/FGC68-Bolt-update-on-lower:a
LBRY Tags: fgc68; fgc68mkii; paintball; magfed; tippmann tmc
but this lower will make it possible to shoot with your TMC mags for a higher round count.
the starter set can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
the collection of FGC68 parts can be found here:
FGC68 MKII
https://www.printables.com/social/180009-untangleworks/collections/88908
FGC68 MKI
https://www.printables.com/social/180009-untangleworks/collections/88907
a video about this lower will be made later:
the ABD installation video can be found here:
https://www.youtube.com/watch?v=5IxGVSHOZ00&t=3s
some of the installation steps that are different from the TIPX lower can be fund in the images for now
parts needed for mag catch.
1x spring 6mm OD, 0.5mm wire, 20mm long
1x m3 bolt in a length of 30mm
1x m3 washer
1x metal pin 4mm OD, 27mm long (a 3d printed part can be used for this)
movies:
UNW FGC68MKII new lowers for the T15, TMC and Dmag / helix mags for this magfed paintball marker
https://www.youtube.com/watch?v=xjbmq-A3C3c
https://odysee.com/@UntangleWORKS:a/UNW-FGC68MKII-new-lowers-low:f
FGC68 a small update on the installation of the new lowers for TMC T15 Dmag mags
https://www.youtube.com/watch?v=PwSyvEeVHTk
https://odysee.com/@UntangleWORKS:a/FGC68-Bolt-update-on-lower:a
LBRY Tags: fgc68; fgc68mkii; paintball; magfed; tippmann tmc
Related to This Release
330
2
FGC-9 MKIISD FGC-6 MKII UNW AR-15 free floating handguard
this package is for the FGC9 MKII, MKIISD
and the MKII MKIISD models of the FGC6 (FA,S) lineup
this “rail sizer” to make your AR15 shroud look bette…
278
5
FGC9-MKII MKIISD UNW227 SLIM shroud FGC6-MKII
I have updated it to a V2 model this will add 1 extra bolt hole so the rail is stronger
--
these MKIISD shroud models will work on the MKII platfor…
316
1
1
FGC-6BL MKI/MKII (BOLT LOCK) starter kit GBB airsoft FGC-9 replica
the FGC-6BL is here making this the first hammer fired semi auto GBB FGC-9 airsoft replica to be released. there will be later also a FGC-6H this wil…
119
3
FGC9-MKIISD UNW300 SLIM shroud or for the FGC6 MKII
I have updated it to a V2 model this will add 2 bolt holes so the rail is stronger
_
what does the MKIISD update mean?
the main update and why thes…
119
2
FGC-68 tipx edition: Helix/ Dmag lower FGC-9 paintball magfed marker
this lower will work with the basic FGC68 upper and parts.
but this lower will make it possible to shoot with your Dmag GEN 1, GEN2 and the HELIX Dma…
Twitter
Matrix
Source
