467
14
View this release
Alternative links
Strike 90 Grip (AR-15): FFFTech/FFFTechnology
A 0°/90° angled grip designed for CQC. Swells from 22.3mm at the top section, and out to 26mm at the bottom.
Has side palm scallops across the bottom-sides of the grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; ar15; firearms; grip; vertical
A 0°/90° angled grip designed for CQC. Swells from 22.3mm at the top section, and out to 26mm at the bottom.
Has side palm scallops across the bottom-sides of the grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; ar15; firearms; grip; vertical
Related to This Release
1972
34
M16Z Double Barrel Ar15
This is the Double Barrel AR15 as seen in the TFB articles M16Z and Pipe Hitter 37mm.
This was formerly released in a limited trial and hosted brief…
394
10
Modern Slav Padded AKM Grip
Modern Slav Padded AKM Grip: Laffs Dynamics
Front padded variant of the original Laffs Dynamics Modern Slav AKM Grip.
Printer Used: Ender 3 V2
F…
408
10
Laffs Enhanced Scarab Mag Releases
Laffs Enhanced Scarab Mag Releases: Laffs Dynamics
Extended magazine releases for the AWCY? Scarab PDW; easier to actuate than the standard L shaped…
106
4
S&W 9mm Shield 90's Remix
Load as single object with multiple parts, [Yes in prusa slicer].
Select a body, left click in side bar, [Add Setting] at bottom.
Select [Fuzzy Skin…
1002
31
FamAR15 SMG 'Commando' Kit
These are alternate compact parts for the FamAR15 and the shorter 10" version of the same Wraith handguard.
I recommend using a solder iron to weld …
Twitter
Matrix
Source
